Hub
Uses GSM or Ethernet to send alarms to the Central Monitoring Station and the owner
Sends a notification in case of electrical power loss and operates for up to 15 hours from battery backup
Checks the functionality of detectors at least every 12 seconds
Principle of operation The device collects information on detector operation in an encrypted format, analyzes the data, and in case of alarm, notifies the system owner and the Central Monitoring Station in just milliseconds. Feature The device uses Jeweller radio technology to monitor the detectors and ensure a quick response to danger. It switches the entire system to clear frequencies during jamming. The device is protected against viruses at software level.
Installation and set up Ready to operate straight out the box. It is set using the mobile application, and the detectors are connected with just one click. It can be mounted in just a few minutes using the SmartBracket mount.
Safe home and office automation Boost the potential of your security system with scenarios to actively resist the threats it detects and automate your routines. Set up a Night mode activation on schedule; turn off all the office lights automatically by arming the system; program the outdoor lights to spotlight trespassers when they trigger an outdoor motion detector; or install a sustainable anti-flood system. The system continues to execute scenarios even if the connection with Ajax Cloud is lost. Reactions to threats Planned actions Reactions to security mode change
Tech specs
Classification The radio channel central unit with GSM and Ethernet modules
Installation Indoors
Connected devices 100
Users 50
Rooms 50
Groups 9
Mobile apps iOS 11.0 and later Android 4.4 and later
Communication channels Ethernet, GSM (850/900/1800/1900 MHz)
Alarm signal Delivery time: 0.15 s Types of notifications: SMS message, call, push
Communication with Central Monitoring Station Contact ID, SIA
Processor ARM
Operating system OS Malevich
Power supply 110-250 V from mains or 12 V when using 12V PSU for Hub/Hub Plus/ReX Built-in back-up battery: Li-Ion 2 А·h Up to 15 hours of offline operation when the Ethernet is switched off Energy consumption from the grid — 10 W
Jeweller radio technology Communication range with detectors — up to 2,000 m in an open space Two-way communication between devices Operating frequencies — 866.0 – 866.6 MHz Self-adjusting RF output power — up to 25 mW Block encryption based on AES algorithm Detector polling period — 12−300 s Frequency hopping
SIM card support Micro SIM 2G
Operating temperature range From -10°С to +40°С
Anti-sabotage Protection against fraud Jamming detection Tamper-resistant
Video surveillance Up to 10 cameras or DVRs
Remote set up +
Dimensions 163 × 163 × 36 mm
Weight 350 g
Warranty Replacement and repair within 24 months of the date of sale. Batteries are not covered under warranty.
Connected ReX 1
Scenarios 5.
MotionCam detectors support No